|
|
|
|
|
|
|
|
|
Tanabe TNF130 Sustec NF210 Normal Feeling Springs 2008+ Infiniti G37 Coupe 2007+ G35 Sedan
2008+ Infiniti G37 Coupe
2007+ Infiniti G35 Sedan
Supreme Ride Comfort. Best Ride Quality. A Tasteful Drop.
Spring Rate Front: 7.6 kg/mm
Spring Rate Rear: 7.2 kg/mm
Lowering Front: -1.0in
Lowering Rear: -0.7in
Characteristics – MAX COMFORT:
--> Lowering = Good
--> Comfort = Excellent
--> Performance = Good
The NF210 coil spring features a tasteful drop, and produces the best overall ride quality and comfort for a performance lowering spring. The lowered stance of the NF210 gives the car an elegant pose, while the spring rates, which are only slightly raised (up to 5% over stock) retain factory ride quality settings.
This coil spring is extremely popular with luxury tuned vehicles, as well as those with larger diameter wheels that want to eliminate fender gap, but maintain excellent driveability while reducing the risk of damage to wheels that is associated with stiffer suspensions.
Comfort especially important on daily driven vehicles, and their passengers. The NF210 provides the best driving experience for all types of roads.
For those who demand the best comfort from a lowering spring.
Drops of up to 1.5" are available
Spring rate is raised no more than 5% over stock.
Lowered center of gravity.
|
Tanabe T70132A Medalion Touring Exhaust System
2008 Infiniti G37 Coupe
60mm-70mm Piping
115mm Tip
Dual Muffler Axle Back
|
|
|
|
|
|
|
|
|
|
|
|
Injen SP1997P Polished 2008 Infiniti G37 Coupe 3.7L V6 6 Cylinder VQ37VHR
Dual Cold Air Intake System With MR Technology
MegaRam Technology
Air Fusion (patent pending) - Engineered to stabilize short term and long term fuel trim levls.
Dyno Tuned, billet mass air flow sensor adaptor.
Calibrated sensor housing for optimal air/fuel ratio.
Aerospace mandrel bend aluminum intake tubes.
Polished
Approximate Power Gains: +15 HP / +11 TQ
Fits:
2008 Infiniti G37 Coupe 3.7L 6 Cylinder
2007 Infiniti G35 Sedan 3.7L 6 Cylinder
2008 Infiniti G35 Sedan 3.7L 6 Cylinder
Replacement Filter: INJ-X-1010-BR
|
Injen SP1997BLK Black 2008 Infiniti G37 Coupe 3.7L V6 6 Cylinder VQ37VHR
Dual Cold Air Intake System With MR Technology
MegaRam Technology
Air Fusion (patent pending) - Engineered to stabilize short term and long term fuel trim levls.
Dyno Tuned, billet mass air flow sensor adaptor.
Calibrated sensor housing for optimal air/fuel ratio.
Aerospace mandrel bend aluminum intake tubes.
Black
Approximate Power Gains: +15 HP / +11 TQ
Fits:
2008 Infiniti G37 Coupe 3.7L 6 Cylinder
2007 Infiniti G35 Sedan 3.7L 6 Cylinder
2008 Infiniti G35 Sedan 3.7L 6 Cylinder
Replacement Filter: INJ-X-1010-BR
|
|
|
|
|
|
|
|
|
|
|
|
Kinetix Racing High Flow Catalytic Converters Hi-Flow Cats for Nissan 370Z and Infiniti G37 HR motors
Complete set! High flow catalytic converters that will pass emissions testing for 2009+ Nissan 370Z, 2008+ Infiniti G37, and 2007+ Nissan 350Z.
Fits:
2009+ Nissan 370Z 3.7L VQ37VHR
2008+ Infiniti G37 3.7L VQ37VHR
2007+ Nissan 350Z 3.5L VQ35HR
|
MXP Infiniti G37 True Dual Exhaust
|
|
|
|
|
|
|
|
|
|
|
|
Infiniti G6950-JL100 2008+ Infiniti G37 Coupe V36 "Infiniti" Brushed-Aluminum Illuminated Kick Plates (LH & RH)
Fits:
2008+ Infiniti G37 Coupe V36
Illuminated Kick Plates
Light up your entrance and protect your front sills.
Brushed-aluminum inserts feature an illuminated Infiniti logo.
|
Berk Technology BT1407-HFC-MET VQ37VHR VQ35HR Motor Metallic High Flow Cats (HFC's) Nissan 350Z 07-up Infiniti G37 08-up Nissan 370z 09-up
Dual 60mm High Flow Catalytic Converters (HFC). Metallic substrate catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Made in the USA
Fits:
2007+ Nissan 350Z
2007+ Infiniti G35
2007+ Infiniti G37
2009+ Nissan 370Z
|
|
|
|
|
|
|
|
|
|
|
|
Fujitsubo FJ 160-15223 Legalis R 2008+ Infiniti G37 CKV36 Coupe Stainless Steel Exhaust System
Fits:
2008+ Infiniti G37 Coupe 3.7L VQ37VHR CKV36
Legalis R is Fujitsubo's most popular model. Designed for street use it improves both low-end and mid-range power. All Legalis R systems are constructed of Stainless Steel, and are available in two different tip styles, round with slanted tip or oval.
Axle-Back, Use OE Y pipe
Pipe Diameter:
60.5mm-50.8mm-60.5mm
Tip Diameter:
117.0mm
dB Level:
87dB*
Outlet:
Dual
Tips:
2
*db results are based upon SAE J1169 standards.
*Sound measurement are for reference purpose only.
*Prior to purchase/ use of Fujitsubo products, please confirm that this product meets all local and state exhaust regulations .
|
BORLA 140260 2008+ Infiniti G37 Coupe Cat-Back Exhaust System H-Pipe
G37 '08-'09 3.7L AT/MT RWD 2DR S RD RL AC PH SR 2.25" TIP 4.5" RD X 7"
Fits:
2008+ Infiniti G37 Coupe
2008 Infiniti G37 3.7L 6cyl VQ37VHR AT 5 Spd RWD
BORLA Cat-Back™ exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
2009 Infiniti G37 Base 3.7L 6cyl VIN# - VQ37VHR AT 7 Spd RWD
2009 Infiniti G37 Base 3.7L 6cyl VIN# - VQ37VHR AT 7 Spd RWD
2009 Infiniti G37 Journey 3.7L 6cyl VIN# - VQ37VHR AT 7 Spd RWD
2009 Infiniti G37 Journey 3.7L 6cyl VIN# - VQ37VHR AT 7 Spd RWD
2009 Infiniti G37 Sport 3.7L 6cyl VIN# - VQ37VHR MT 6 Spd RWD
2009 Infiniti G37 Sport 3.7L 6cyl VIN# - VQ37VHR MT 6 Spd RWD
2009 Infiniti G37 Sport 3.7L 6cyl VIN# - VQ37VHR MT 6 Spd RWD
2009 Infiniti G37 Sport 3.7L 6cyl VIN# - VQ37VHR MT 6 Spd RWD
2008 Infiniti G37 Base 3.7L 6cyl VIN# - VQ37VHR AT 5 Spd RWD
2008 Infiniti G37 Journey 3.7L 6cyl VIN# - VQ37VHR AT 5 Spd RWD
2008 Infiniti G37 Sport 3.7L 6cyl VIN# - VQ37VHR MT 6 Spd RWD
|
|
|
|
|
|
|
|
|
|
|
|
Tein GSP92-FUAS4 2009 Nissan 370z Mono-Flex US Spec Coil-Over Suspension
TEIN PART#: #GSP92-FUAS4
Application: Nissan 370Z US Spec Mono FLEX / Infiniti G37 Coupe US Spec Mono FLEX
- Spring Rates: 14kg Front & Rear
- Adjustment Range 0 to -100mm (Front), -4 to -63mm (Rear)
|
Tein DSP92-6UAS4 2009 Nissan 370z Flex US Spec Coil-Over Suspension Infiniti G37 Coupe
TEIN PART#: #DSP92-6UAS4
Application: Nissan 370Z US Spec FLEX / Infiniti G37 Coupe US Spec FLEX
- Spring Rates: 14kg Front & 12kg Rear
- Adjustment Range 0 to -100mm (Front), -4 to -63mm (Rear)
- EDFC Compatible - Part #'s EDK04-K4469, EDK05-12120 - MSRP $418.00
Twin Tube Dampers, Powder Coated Lower brackets
|
|
|
|
|
|
|
|
|
|
|
|
|
Tein DSP92-2UAS4 2008+ Infiniti G37 Coupe US 2009+ Nissan 370z Super Street w/ Upper Mount Coil-Over Suspension
TEIN PART#: #DSP92-2UAS4
Application: 2008+ Infiniti G37 Coupe US 2009+ Nissan 370z Super Street W/ Upper Mount
- Spring Rates: 9kg Front & 8kg Rear
- Adjustment Range -0.6 to 2.2 inch (Front), 0 to -2.0 inch (Rear)
- EDFC Compatible
|
Stillen 402838 Dual Intake System 2008 Infiniti G37 Coupe
Fits:
2008+ Infiniti G37 Coupe 3.7L VQ37VHR
Twin Intake
Dual Filters / Air Boxes
CARB Pending
(G37 Coupe - Manual Trans Requires Relocation of Relay Box - Instructions Included)
The first step in upgrading your car's performance is to replace the restrictive stock air box with a STILLEN Hi-Flow Intake.
Additional air flow increases the engine's efficiency and power output by increasing the quantity of the air/fuel ratio. The STILLEN Hi-Flow consists of a either a precision machined ring and a gauze element (cleanable) filter or the newer K&N cone filters which incorporate a velocity stack which uses the venturi effect to accelerate air intake speed.
Power and throttle response will improve throughout the entire RPM range. Your best dollar-per-horsepower investment by far! Most people find the authoritative note of the intake pleasing, but note that increased noise levels will result.
Most STILLEN Hi-Flow Intakes are CARB Approved, while others are currently CARB Pending, and may not be 50 state legal until approved. Clean your filter regularly for best results.
|
|
|
|
|
|
|
|
|
|
|
|
Stillen 504400 Dual Exhaust System Infiniti G35 Coupe G37 Coupe
Fits:
2008+ Infiniti G37 Coupe 3.7L V6 VQ37VHR
2003-2007 Infiniti G35 Coupe 3.5L V6
STILLEN'S exhaust for the G35 and G37 Coupe is the result of months of development and testing on the G35, G37 and 350Z.
STILLEN's Cat-Back Exhaust System helps drum up substantial horsepower and torque, giving your G the extra edge of performance. This Exhaust System is a true Cat-Back System, and is crafted of Mandrel-bent Stainless Steel for a long service life. At idle the STILLEN Exhaust is unobtrusive, however when pressed, STILLEN's recognizable, trademark sound emanates. This is a pleasing tone, authoritative and yet responsible. Not only does this exhaust system have a sharp, show ready look, but it also offers impressive horsepower and torque gains as well as a lifetime warranty and is easy to install.
STILLEN's Cat-Back Exhaust is built for power. Power that you can feel across the power band with a big gain on top. Mileage gains during highway travel can be expected as you cruise at steady speeds. The free flowing performance mufflers and tips are made out of polished stainless steel for long life. The STILLEN fit and finish is second to none. The improved airflow created by the addition of the exhaust is verified by the significant dyno HP increase. All STILLEN stainless steel exhausts feature a limited lifetime warranty.
|
Stillen 304685 Sway Bar Kit 2008 Infiniti G37 Coupe
Front & Rear Kit
Non-Adjustable Front
3-Way Adjustable Rear
Fits:
2008+ Infiniti G37 Coupe 3.7L V6 VQ37VHR
Sway Bars maintain feel and control by balancing the vehicle and keeping your car from rolling excessively in the corners. They also play a critical function by keeping maximum tire contact with the road. Original equipment Sway Bars are often way too small for true performance. These bars are made from high strength aircraft grade steel. Such a strong material is required for maximum torsional strength and durability.
Some sway bar kits are adjustable, allowing drivers to adjust the ride from 7% to 70% stiffer than stock, making the vehicle pleasant on the boulevard and aggressive at the track.
All STILLEN Sway Bars come complete with quality hardware and installation instructions.
|
|
|
|
|
|
|
|
|
|
|
|
H&R Springs 53030 Lowering Sport Springs 2008 Infiniti G37 Coupe
Fits:
2008+ Infiniti G37 Coupe 3.7L V6 VQ37VHR
Approximate Lowering: -1.2" Front / -1.0" Rear
H&R Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
|
Full staggered set of 4 Enkei Racing GTC01 Hyper Black Wheels for 2008+ Infiniti G37 Coupe 19x8.5 19x9.5
Fits:
2008+ Infiniti G37 Coupe
Infiniti G35... Nissan 350Z... Plus many more!
Email sales@outperformanceshop.com to check fitments for your vehicle.
Finish: Hyper Black
Bolt Pattern: 5x114.3
Offset: 42mm
Front Wheels: 19x8.5 23.1lbs Part# ENK-429-985-6542HB
Rear Wheels: 19x9.5 24.4lbs Part# ENK-429-995-6542HB
Recommended tire size Front: 225/45/19
Recommended tire size Rear: 245/40/19
|
|
|
|
|
|
|
|
|
|
|
|
Full staggered set of 4 Enkei Racing RP03 Silver Wheels for 2008+ Infiniti G37 Coupe 19x8.5 19x9.5
Fits:
2008+ Infiniti G37 Coupe
Infiniti G35... Nissan 350Z... Plus many more! Email sales@outperformanceshop.com to check fitments for your vehicle.
Finish: Silver
Bolt Pattern: 5x114.3
Offset: 42mm
Front Wheels: 19x8.5 lbs Part# ENK-396-985-6542SP
Rear Wheels: 19x9.5 lbs Part# ENK-396-995-6542SP
Recommended tire size Front: 225/45/19
Recommended tire size Rear: 245/40/19
|
Full staggered set of 4 Enkei Racing RP03 SBC - Wheels for 2008+ Infiniti G37 Coupe 19x8.5 19x9.5
Fits:
2008+ Infiniti G37 Coupe
Infiniti G35... Nissan 350Z... Plus many more! Email sales@outperformanceshop.com to check fitments for your vehicle.
Finish: SBC - SPECIAL BRILLIANT COATING
Bolt Pattern: 5x114.3
Offset: 42mm
Front Wheels: 19x8.5 20.5lbs Part# ENK-396-985-6542SBC
Rear Wheels: 19x9.5 21.6lbs Part# ENK-396-995-6542SBC
Recommended tire size Front: 225/45/19
Recommended tire size Rear: 245/40/19
SBC (SPECIAL BRILLIANT COATING) - Breakthrough technology has enabled ENKEI to achieve a chrome-looking finish using synthetic coating and cosmetic techniques. SBC delivers a brilliant metal finish without the high maintenance associated with chrome and is used by ENKEI to maintain lightweight characteristics and enhance the finish of the wheels.
|
|
|
