|
|
|
|
|
|
|
|
|
GReddy 15500214 Profec 2012 Electronic Boost Controller EBC w Organic LED Display
GReddy is proud to introduce the next evolution in the GReddy PRofec line of electronic boost controllers. The new PRofec is compact, powerful and easy to use. The large OLED Display, with a simple two-button / rotary-dial control, make for intuitive operation. An ultra slim controller can display in digital, bar-graph, or graphical modes and can be rotated 180 degree for installation with the included adjustable mount or flush mounted. By separating the display and control unit in the driver’s compartment, from the engine compartment-mounted, waterproof, sensor unit, it makes installation straightforward. Only one thin harness is required to be routed through the firewall. The combination of the new 300kPa (43.5psi) integrated pressure sensor, the more compact solenoid valve and faster CPU processor, provide quicker response and the most stable boost curves yet. The PRofec also maintains popular features like, Lo, Hi, Scramble boost presets, last-boost display, peak-hold recall, warning alert and safety limiter.
Ultra slim Control Unit with large OLED Display
Separated waterproof Sensor Unit, Sensors and Sensor Unit remain in the engine compartment for easy installation
New faster CPU processor & smaller solenoid valve provide quicker response and more stable boost curve
Integrated 300kPa (43.5psi) performance pressure sensor
Intuitive programming and operation with large programing screen and 2-button / Dial knob control
Three boost display modes: Numeric, Bar-Graph, & Graphical
Compatible with actuator-style or external wastegates types
LO and HI boost settings, with a third Scramble boost setting
Last Boost as well as, Peak Hold Boost recall
Programmable Audible and visual boost warning feature
Safety Limiter setting for over-boost situations.
|
Racing TI-C 2008-up Mitsubishi Lancer Evolution X EVOX Evo10 CZ4A 4B11 80MM w/ Single 115MM Titanium Tip Titanium Tip w/ Stainless Steel SUS304
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Suction Pipe 2008-up Mitsubishi Evolution X EVOX Evo10 CZ4A 4B11 80MM Rear *Does NOT include Airinx GReddy-12531013
|
Aluminum Intake Pipe Set Mitsubishi Evolution X CZ4A EVOX Evo10
|
|
|
|
|
|
|
|
|
|
|
|
|
Circuit Spec Oil Cooler Kit Mitsubishi CZ4A STD
|
Circuit Spec SST Transmission Cooler Kit 2008-2010 Mitsubishi Evolution X MR CZ4A
|
|
|
|
|
|
|
|
|
|
|
|
|
Circuit Spec SST Transmission Cooler Kit w/ MSS Multi Switching System 2008-2010 Mitsubishi Evolution X MR CZ4A
|
RS Cat-Back Exhaust System 2008-2013 Mitsubishi Lancer Evolution 10 EVOX EVO10 CZ4A 4B11 80MM Stainless Steel SUS304
|
|
|
|
|
|
|
|
|
|
|
|
|
SP Elite Cat-Back Exhaust System 2008-2010 Mitsubishi Lancer Evolution X EVOX Evo10 CZ4A 4B11 GSR MR 70MM Sideways Muffler w/ 2x 115MM Tips *Does NOT fit RallyArt Stainless Steel SUS304
|
Evo III Evo3 Cat-Back Exhaust System 2008-2013 Mitsubishi Evolution 10 EVO10 EVOX CZ4A 3" Stainless Steel SUS304
|
|
|
|
|
|
|
|
|
|
|
|
Turbosmart TS-0205-1020 Blow-Off Valve Dual Port Mitsubishi - Red
Easy to install and setup, the Mitsubishi Dual Port features sequential ports for quiet operation on mild boost and full performance at full boost.
Suits Mitsubishi EVO VI – X, Ralliart Colt.
Supplied with blanking plug.
|
Turbosmart TS-0205-1021 Blow-Off Valve Dual Port Mitsubishi - Black
Easy to install and setup, the Mitsubishi Dual Port features sequential ports for quiet operation on mild boost and full performance at full boost.
Suits Mitsubishi EVO VI – X, Ralliart Colt.
Supplied with blanking plug.
|
|
|
|
|
|
|
|
|
|
|
|
Turbosmart TS-0402-1014 Fuel Pressure Regulator FPR Fuel Rail Adapter Mitsubishi (EVO)
Mitsubishi 4B11T EVO 10 EVOX
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hypertech 62006 Max Energy Sport 2008-2009 Mitsubishi Lancer Evolution X
Max Energy Sport Power Programmer
Delivers The Maximum Tune
Max Energy Power Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, Hypertech's engineers first make hundreds of dyno runs to optimize the spark and air-fuel curves point by point over the entire rpm band from just off idle to wide open throttle. Next they take the vehicle with the new tune to the track and the street to verify real world performance gains. The results…maximum power, quicker acceleration, smoother shifting and better driveability.
The Max Energy Sport not only gives you the power you crave but also offers specific features for your make, model and year.
|
|
|
|
|
|
|
|
|
|
|
|
AEM 21-678C 2008-2010 Mitsubishi Evo X 2.0L - L4 Turbo Lancer Evolution Cold Air Intake System Charcoal
Charcoal
Approximate Power Gains: +17 HP / +17 TQ
|
A'PEXi 507-M009 Power Intake 2008+ Mitsubishi EVO X (CZ4A)
- Dry Filter Element (non-oil), for increased air flow efficiency that improves throttle response and does not foul air flow sensors
- Easy install onto factory intake hose
- Includes hardware and heat shield
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AB-491030 Mitsubishi Evo X Carbon Fiber Front Bumper Canard Set
APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times.
|
APR Performance CF-410031 Mitsubishi Evo X Carbon Fiber Radiator Cooling Shroud
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be.
To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance CF-410012 Mitsubishi Evo X Carbon Fiber Vortex Generator
The APR vortex generator assists the vehicles aerodynamics by providing additional down force at high speeds, reduces drag, increases velocity around the rear spoiler, and decreases the amount of lift.
|
APR Performance CW-489110 Mitsubishi Evo X w/o Factory Lip Carbon Fiber Wind Splitter With Rods
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance FA-410006 Mitsubishi Evo X Carbon Fiber Front Air Dam / Front Lip
Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance. The APR Performance Front Air Dam integrates with the factory front bumper to:
- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip
This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce.
|
APR Performance AB-300011 Universal 8mm Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AB-300014 Universal 10mm Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
APR Performance AB-300018 Universal 10mm Extended Length Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AB-300019 Universal 10mm Quick Release Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
APR Performance AS-106740 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 67 Inch Airfoil
|
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AS-106140 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 61 Inch Airfoil
|
APR Performance AS-105940 Mitsubishi Evo X Carbon Fiber GTC-200 Wing 59.5 Inch
|
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AA-100065 Spoiler Accessory 2 Inch Pedestal Risers for GTC-300 GTC-500 Wing *Pair*
|
APR Performance AA-100066 Spoiler Accessory 3 Inch Pedestal Risers for GTC-300 GTC-500 Wing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance AA-100228 Spoiler Accessory 2.5 Inch Pedestal Risers for GTC-200 EVO WRX Spec Wings
|
APR Performance AA-100100 Spoiler Accessory Wing Angle Indicator
|
|
|
|
|
|
|
|
|
|
|
|
Carbign Craft CBX-EVOGRILL Mitsubishi Evo X Carbon Fiber Front Bumper Grill Bezel
Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Grill Bezel. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.
|
Carbign Craft CBX-EVOHDSCP Mitsubishi Evo X Carbon Fiber Hood Scoop
Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Hood Scoop. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.
|
|
|
|
|
|
|
|
|
|
|
|
APR Performance CW-411096 Mitsubishi Evo X with Factory Lip Carbon Fiber Wind Splitter With Rods
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
|
Tanabe TUB139F Front Under Brace 4 Point Mitsubishi EvoX 2008 (CZ4A)
2008+ Mitsubishi Evolution X EvoX (CZ4A)
Often overlooked, especially on vehicles that are reaching higher levels of modification, is the importance of reinforcing the chassis. All vehicles experience flexing of the unibody under various handling loads. Twisting of the chassis is also very common on higher horsepower vehicles.
The SUSTEC UNDERBRACE prevents this unwanted behaviour by connecting specific points of the undercarriage to reinforce the chassis. Unique internal double-i-beam construction is highly rigid, and lightweight, so the chassis may be significantly reinforced without adding surplus weight.
Noticeable gains in balance and stability are gained after it's simple bolt on installation.
|
|
|
|
|
|
|
|
|
|
|
|
Samco TCS383 Turbo Hose Kit (6) 2008+ Mitsubishi Evolution X
The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use.
|
Samco Sport TCS383C Coolant Hose Kit (4) 2008+ Mitsubishi Evolution X
The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use.
|
|
|
|
|
|
|
|
|
|
|
|
AMS 3" Stainless Steel Test Pipe for 2008+ Mitsubishi Evolution X
Off-Road Use Only
This eliminates the factory catalytic converter.
|
AMS Racing Series Single Tip Catback Exhaust System for 2008+ Mitsubishi Evolution X
This is a no-nonsense all business exhaust system designed to make the most power and shed serious weight off your EVO X. With a 100% stainless steel construction and 3" diameter from end to end and only two small 15 Degree bends, you can expect to see as much as 15+ Wheel Horsepower gains over stock.
|
|
|
|
|
|
|
|
|
|
|
|
|
The AMS replacement intercooler core for your EVO X is a direct bolt on utilizing your stock piping hangers and mounting points with purpose built end tanks for the EVO X. This intercooler has over 80% more internal flow area than its stock counterpart.
|
AMS Upper Intercooler Pipe Hot Pipe 2008+ Mitsubishi Evolution X
Designed to flow more air than its stock counterpart and increase horsepower, and that it does! With this simple upgrade AMS produced an additional 5 awhp peak and 10+ awhp gains in the midrange!
|
|
|
|
|
|
|
|
|
|
|
|
|
The AMS EVO X intake pipe is designed to improve air flow to the turbocharger and increase horsepower and performance.
|
AMS Front Lower Motor Mount / Engine Mount Insert
Bushing Insert for 2008+ Mitsubishi Evolution X
Must be pressed
|
|
|
